Boss Air Master Onboard Air

Description

This onboard air kit will give you full control of your Load Assist Air Bag Suspension height from inside the cab with good volume of air supply for air tools, inflation of 4×4 tyres for you and your mates.

Includes

• 1 x PX-07 3/4 hp 12 volt BOSS Air Compressor
• 1 x AT-03 3 Gallon/ 9ltr 5 port Boss Aluminium Air Tank
• 1 x 110-135psi Pressure Switch
• 1 x 700mm Teflon Coated Stainless Steel Braided Hose
• 1 x 100% Duty Solenoid
• 1 x Check Valve
• 1 x Flare Fitting
• 1 x Drain Tap
• 1 x 3/8” 12v Electric Solenoid/ Valve
• 1 x 12volt momentary switch for compressor
• 1 x BOSS 200psi Dual Needle back-lit Gauge
• 2 x Pneumatic Push Buttons for dropping each bag
• 1 x Stamped stainless steel gauge panel
• 4 x 1/4” female push fittings for gauge and buttons
• 10 meters of 1/4” J844 DOT Airbrake line
• 2 x 3/8 check valves
• 5 x 1/4” push connect fittings
• 3 x Y Connectors,
• 2 x T Connectors
• 1/4” x 3/8”NPT fitting to connect airbrake line to air locker
• 10 x Cable Ties
• Instruction Sheet

Compressor Specs:

• 12volt compressor 3/4 hp engine 100% duty cycle
• 170ltr free flow rate (approx 3.5cfm)
• recommended working pressure 0-150psi
• maximum pressure 200psi – 31.5 amp maximum draw.
• Fan cooled engine and cylinder head
• oil free design
• 3/8npt ported head, rebuildable design, crank case fed
• external washable air filter
• cast aluminum legs
• special piston valve design for maximum performance

– MUST USE CHECK VALVE TO PREVENT BACK FLOW+ 40 AMP FUSE – NEVER OIL THIS COMPRESSOR