NSK-8181DMF : Navara D40 05-15 & R51 Pathfinder 05-15 Diesel – EXEDY Clutch Kit OEM Dual Mass Flywheel Replacement

Description

EXEDY is the premier supplier of clutch products to the automotive aftermarket in Australia and NZ.

EXEDY are the world’s largest original equipment clutch manufacturer (OEM) for Japanese vehicles supplying clutch products to 45% of all Japanese vehicles built, as well as being an OE supplier to Ford and General Motors.

EXEDY has been at the forefront of new clutch technology for over twenty years and their involvement in motor sports from club meets to F1 and MotoGP is a key driver of development across their range of products.

Parts Garage only sells genuine Exedy components which are covered by Exedy’s world wide 12 month/20,000km manufacturers warranty.

Suits

• NISSAN NAVARA RX D40 ACUD40 07/2008-04/2015 Cab Chassis 2.5 L, DIESEL, YD25DDTI I4 16v DOHC Turbo Direct Inj {106KW} 4WD AT/MT [Notes:250mm Flywheel : CHECK SIZE]
• NISSAN NAVARA ST, ST-X D40 CVAD40 04/2012-04/2015 Utility 2.5 L, DIESEL, YD25DDTI I4 16v DOHC Turbo Direct Inj {120KW} RWD AT/MT [Notes:250mm Flywheel : CHECK SIZE]
• NISSAN NAVARA RX, ST-X KING CAB D40 NCUD40 03/2008-10/2015 Utility 2.5 L, DIESEL, YD25DDTI I4 16v DOHC Turbo Direct Inj {126KW} 4WD AT/MT [Notes:250mm Flywheel : CHECK SIZE]
• NISSAN NAVARA RX D40 VCGD40 12/2009-10/2015 Utility 2.5 L, DIESEL, YD25DDTI I4 16v DOHC Turbo Direct Inj {128KW} RWD AT/MT [Notes:250mm Flywheel : CHECK SIZE]
• NISSAN NAVARA RX, ST-X D40 CVND40 12/2005-04/2015 Utility 2.5 L, DIESEL, YD25DDTI I4 16v DOHC Turbo Direct Inj {128KW} 4WD AT/MT [Notes:250mm Flywheel : CHECK SIZE]
• NISSAN NAVARA ST, ST-X, RX D40 VCUD40 12/2009-04/2015 Utility 2.5 L, DIESEL, YD25DDTI I4 16v DOHC Turbo Direct Inj {128KW} 4WD AT/MT [Notes:250mm Flywheel : CHECK SIZE]
• NISSAN PATHFINDER ST, ST-L, TI, TITANIUM R51 JVWR51 07/2005-05/2010 SUV 2.5 L, DIESEL, YD25DDTI I4 16v DOHC Turbo Direct Inj {128KW} 4WD AT/MT [Notes:250mm Flywheel : CHECK SIZE]

Type

Kit includes O.E. type DMF

Specifications

• Flywheel Profile Flat
• Size 250
• Spline OD 25.5
• No of Teeth 24
• Crank Bolt Torque 108 Nm
  
• Spigot Included in Kit
• Alignment Tool Included in Kit