High pressure resistance
Extraordinarily tear-proof lubricating film with excellent noise and vibration dampening
Good creep properties
- Excellent lubricating properties for small gaps
- Reliable protection against corrosion
Lubricant is centrifuge-resistant on turning and rotating parts
Good material compatibility
O and X-ring compatible, as well with plastics. Neutral behaviour on painted substrates.
Resistant to splashed water, salt water, weak acids and alkalis
Silicone-free, resin-free and acid-free
Resistance to high pressure loads
The HHS 2000 lubricating film remains active and does not tear off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points, which is why we recommend a thorough and careful pre-clean with HHS Clean prior to application, art. 089310610.
Suitable for universal lubrication and for high pressure loads, e.g. shifting, accelerator and clutch linkages, Bowden cables, pins, joints, hinges, reversing levers, lock strikers, drag link ends, sliding rails, chain wheels, toothed racks and open gearwheels
Shake the can before use, spray the parts and let it take effect briefly. After use, spray the can upside down until it is empty.
|Oil basis||Synthetic mineral oil|
|Density conditions||at 20°C|
|Min. temperature conditions||-25 °C|
|Max. temperature conditions||180 °C|
|Max. short-term temperature resistance||200 °C|
|Min. flashing point of active ingredient||300 °C|
|Kinematic oil basis viscosity||1500 cSt|
|Resistance against||Salt water
|Shelf life from production||24 Month|