Description
PRODUCT: Diesel Fuel Injector
BRAND: DENSO
PART NUMBER: 095000-6240
ALTERNATE PART NO: 0950006240, DCRI106240
OEM PART NO: 16600-VM00A, 16600-VM01A, 16600-VM00B, 16600-VM00C, 16600-VM00D, 16600-MB40A, 16600-MB40B, 16600-MB40C, 16600-MB40D, 16600-MB40E
Please note– the last number of the part number above does not effect the injector supplied. ie. If your injector number begins with 095000-624* this is the correct injector for your vehicle)
Per car quantity: 4
COMPATABILITY
- NAVARA DX D22 APGD22 YD25DDT 98kW 2 Door Cab Chassis 03/2002 – 2009
- NAVARA ST-R D22 CPUD22 YD25DDT 98kW 4 Door Ute 03/2002 – 2005
- NAVARA ST-R D22 CPUD22 YD25DDT 98kW 4 Door ute 2006 – 03/2011
- NAVARA DX D22 APUD22 YD25DDT 98Kw 2 Door Cab Chassis 02/2008 – 2009
- NAVARA ST-R D22 CPUD22 YD25DDT 98kW 4 Door Ute 02/2008 – 10/2015
- NAVARA DX D22 APUD22 YD25DDT 98kW 2 Door Cab Chassis 02/2008 – 10/2015
- NAVARA DX D22 APGD22 YD25DDT 98kW 2 Door Cab Chassis 02/2008 – 10/2015
Notes:
Product Notes;
- Injectors must be Coded and an Engine Adaption carried out
- Injector codes are the middle 8 digits.
Installation Tips
- Should check vin to ensure fitment.
- Load compensation codes prior to fitment to ensure correct.
- See technical drawings/wiring diagrams – for fitting tips!
Variant coding Note
- 095000-6240 – BEGINS WITH D2xxx
- 095000-6250 – BEGINS WITH D3xxx
If you are unsure about which injector you need, contact us. Please have your VIN or registration number ready and our team will be able find the right part for your vehicle.
Common Rail Injector Compensation Codes
The replacement of most modern Common Rail Diesel Injectors necessitates a calibration procedure. This ensures the vehicle’s electronic injection system is set up to compensate for the finite variances between the injectors. Close attention to correct procedure is a must!
These Common Rail Injectors have a unique calibration or compensation code that needs to be loaded to the engine ECU. Before proceeding to install the replacement injectors, it is essential to locate the calibration codes on each of the new injectors and ensure the codes are related to each injector and their respective location or cylinder.
A helpful tip is to load the new compensation codes prior to installation.
This not only ensures the procedure is carried out- it also eliminates the possibility of installing the incorrect units, as the vehicle simply won’t accept the incorrect codes.
Below are pictures showing the calibration codes on several of the popular brands of injectors which are normally located on the injector solenoid or on a sticker on the injector body.
Note: For Denso CR Injectors, the compensation codes are 0-9 and A to F ONLY.
Reviews
There are no reviews yet